组 及说明
1.1 适用产品系列
本案例适用于WA53、WA56系列的AP。
配置步骤
1.1.1 AP瘦切胖配置案例（Bootrom）
操作风险提示：AP瘦切胖有风险，操作不当或者意外断电会导致设备故障，操作需谨慎。命令行升级需在PC上搭建TFTP Server（推荐用户使用3CDaemon搭建TFTP服务器）
将软件版本下载到设备FLASH内，然后通过命令行加载Bootrom版本，再加载主机软件版本，加载时输入的文件名一定要一致，建议复制黏贴，然后升级过程中避免断电重启操作。
1、先从官 下载WA5300的胖版本，
http://www.h3c.com/cn/Service/Document_Software/Software_Download/IP_Wlan/AP/H3C_WA5300(WA5530_WA5510E-T_WA5530-SI_WA5630X)/
下载压缩包WA5300-CMW710-R2417P01-FAT.zip，解压生成ipe文件，放到电脑桌面上。
2、电脑通过 线连接到ap的一个 口，电脑 卡设置为：192.168.0.1 255.255.255.0，如下例子打开TFTP服务器，把ipe软件版本放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定。
3、console口操作，console口登录方法参考《1.03 设备管理-Console登录方法》
在AP重启的时候按住不停地按Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分。
===============
| Boot System |
| Enter Serial SubMenu |
| Enter Ethernet SubMenu |
| File Control |
| Restore to Factory Default Configuration |
| Skip Current System Configuration |
| BootWare Operation Menu |
| Skip Authentication for Console Login |
| Storage Device Operation |
| Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 此处按键 Ctrl+F，作用：格式化flash
Warning:All files on flash will be lost! Are you sure to formatY/N]Y //输入Y
…
Format success.
===============
| Boot System |
| Enter Serial SubMenu |
| Enter Ethernet SubMenu |
| File Control |
| Restore to Factory Default Configuration |
| Skip Current System Configuration |
| BootWare Operation Menu |
| Skip Authentication for Console Login |
| Storage Device Operation |
| Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): //按键Ctrl+Y，设置ap胖模式或者瘦模式
Please select the new mode
Current mode is Fit //提示当前是fit瘦模式
===================================================================
|NO. Mode |
|1 Fat Mode |
|2 Fit Mode |
|0 Exit |
===================================================================
Enter your choice(0-2):1 //输入1，即fat胖模式
Changed to fat mode successfully! //修改成fat胖模式成功
===============
| Boot System |
| Enter Serial SubMenu |
| Enter Ethernet SubMenu |
| File Control |
| Restore to Factory Default Configuration |
| Skip Current System Configuration |
| BootWare Operation Menu |
| Skip Authentication for Console Login |
| Storage Device Operation |
| Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 3 //进入以太口子菜单
======
|Note:the operating device is flash |
| Download Image Program To SDRAM And Run |
| Update Main Image File |
| Update Backup Image File |
| Download Files(.) |
| Modify Ethernet Parameter |
| Exit To Main Menu |
|
===================================================================
Enter your choice(0-5): 5 //修改以太口参数
============
|Note: ‘.’ = Clear field. |
| ‘-’ = Go to previous field. |
| Ctrl+D = Quit. |
===================================================================
Protocol (FTP or TFTP) :ftp TFTP
//忽略输出内容，直接输入TFTP，然后回车
Load File Name : WA5300-CMW710-E2329P01-FAT.ipe
//忽略输出内容，直接输入WA5300-CMW710-E2329P01-FAT.ipe，然后回车
Target File Name : WA5300-CMW710-E2329P01-FAT.ipe
//忽略输出内容，直接输入WA5300-CMW710-E2329P01-FAT.ipe，然后回车
Server IP Address :192.168.0.1
//忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车
Local IP Address :192.168.0.50
//忽略输出内容，直接输入和电脑主机的ip同一 段，比如192.168.0.50，然后回车
Gateway IP Address :0.0.0.0
//忽略输出内容，直接回车
备注：注意给电脑手动配置一个与AP同 段的IP地址，保证电脑与AP路由可达
======
|Note:the operating device is flash |
| Download Image Program To SDRAM And Run |
| Update Main Image File |
| Update Backup Image File |
| Download Files(.) |
| Modify Ethernet Parameter |
| Exit To Main Menu |
|
===================================================================
Enter your choice(0-5): 2 //输入2，更新版本
Loading…Done.
38265856 bytes downloaded!
Image file wa5300-fat-boot.bin is self-decompressing…
Saving file flash:/wa5300-fat-boot.bin …Done.
Image file wa5300-fat-system.bin is self-decompressing…
Saving file flash:/wa5300-fat-system.bin …Done.
======
|Note:the operating device is flash |
| Download Image Program To SDRAM And Run |
| Update Main Image File |
| Update Backup Image File |
| Download Files(.) |
| Modify Ethernet Parameter |
| Exit To Main Menu |
|
===================================================================
Enter your choice(0-5): 0 //输入0，返回
===============
| Boot System |
| Enter Serial SubMenu |
| Enter Ethernet SubMenu |
| File Control |
| Restore to Factory Default Configuration |
| Skip Current System Configuration |
| BootWare Operation Menu |
| Skip Authentication for Console Login |
| Storage Device Operation |
| Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 0 //输入0，重启AP
System is starting…
设备启动完成
Press ENTER to get started.
//升级成功
%Dec 15 18:56:54:395 2017 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0.
建议与总结：
先Ctrl+F格式化flash，再Ctrl+Y选择胖模式，最后加载fat版本。
声明：本站部分文章及图片源自用户投稿，如本站任何资料有侵权请您尽早请联系jinwei@zod.com.cn进行处理,非常感谢！