Flexsim时间表界面介绍

Flexsim时间表界面介绍

《Flexsim时间表界面介绍》.mp33:16来自LearningYard学苑

相信大家对于时间表的了解已经非常熟悉了，它在一定程度上约束着我们的生活，让我们知道什么时候该上课该工作，什么时候可以休息。

I believe everyone is very familiar with the timetable. It restricts our lives to a certain extent, letting us know when we should go to class and work, and when we can take a break.

Flexsim仿真软件中的时间表也一样，可以控制实体状态，什么时候运行工作什么时候停止工作。

The timetable in the Flexsim simulation software is the same, you can control the state of the entity, when to run and when to stop.

一个时间表可以控制多个实体的状态，一个实体也可以被多个时间表控制。

One schedule can control the status of multiple entities, and one entity can also be controlled by multiple schedules.

那么接下来我就为大家介绍一下软件中时间表的界面状况，便于之后对于时间表的应用。

Then I will introduce the interface status of the timetable in the software for you to facilitate the application of the timetable in the future.

如何添加时间表

在成员实体选项卡中，可以通过加 来添加实体，也可以选择用吸管直接吸取实体，当实体较多且实体类型单一时，便采用前者。

In the Member Entity tab, you can add entities through the plus sign, or you can choose to use a straw to directly absorb entities. When there are more entities and a single entity type, the former will be used.

选择实体成员

在功能选项卡中呢，共有两个函数，两个触发，其中中断函数是指，在成员列表中的实体到达停机时间时，将执行一次中断函数，停止实体，行进到指定位置，延迟等待直到中断时间结束，进行到指定实体，延迟等待直到中断结束，停止输入输出；那么恢复函数便显而易见是指停止时间结束时，恢复实体，恢复输入输出的函数。

In the function tab, there are two functions and two triggers. The interrupt function means that when the entity in the member list reaches the downtime, the interrupt function will be executed once, stop the entity, travel to the specified position, and wait until When the interruption time is over, proceed to the designated entity, and wait until the interruption ends and stop the input and output; then the recovery function obviously refers to the function that restores the entity and resumes the input and output when the stop time ends.

中断触发是指在所有成员实体执行完中断函数之后立即触发一次，可以设置位置、转角、大小或位置、以及颜色和标签；恢复触发是指在所有成员实体执行完恢复函数之后立即触发一次，同样可以设置以上的参数选项。

Interrupt trigger means to trigger once after all member entities have executed the interrupt function. You can set the position, corner, size or position, as well as color and label; resume trigger means to trigger once after all member entities execute the resume function, the same You can set the above parameter options.

那么总的来说，时间表的触发逻辑便如下图所示

So in general, the trigger logic of the timetable is as shown in the figure below

接下来便是表格选项卡，时间表可以设置在不同的模式，有不重复、日时间表、周时间表、自定义时间表和根据日期时间表。

Next is the table tab. The timetable can be set in different modes, including non-repetition, daily timetable, weekly timetable, custom timetable and date-based timetable.

不重复时间表的基本样式如下：

The basic style of the non-repeating schedule is as follows:

其中操作选项是有很多种操作状态的，可以根据自己的建模需求选择对应的数字

Among them, the operation options have many operating states, and you can choose the corresponding number according to your own modeling needs.

选择操作

自定义时间呢，和不重复时间类似，只是可以不断重复地进行，可以根据需求设置重复周期

The custom time is similar to the non-repeated time, except that it can be repeated continuously, and the repetition period can be set according to the needs.

日时间表呢，便是根据需要选择工作时间，将其附上颜色，并且可以在下排看见起止时间。

As for the daily schedule, you can choose the working hours according to your needs, add colors to them, and you can see the start and end times in the lower row.

日时间表

周时间表与日时间表类似，拖拉选择即可

The weekly timetable is similar to the daily timetable, just drag and choose

根据日期时间表，也类似

According to the date schedule, it’s similar

但是时间表的设置，需注意，如果模型的启动时间和时间表的开机时间一致，时间表对应的成员实体不会触发任何函数，当模型启动时间早于时间表时间时，运行到开机时间，才会触发恢复函数。

However, when setting the schedule, please note that if the model’s start time is consistent with the schedule’s start-up time, the member entity corresponding to the schedule will not trigger any function. When the model’s start-up time is earlier than the schedule time, it runs until the start-up time Will trigger the recovery function.

参考资料：哔哩哔哩—小付同学

英文翻译：Google翻译